首頁 >>> 產品目錄 >>> 日本大和科學株式會社產品YAMATO SCIENTIFIC >>> 日本雅馬拓YAMATO│等離子清洗機

日本YAMATO等離子清洗機[產品打印頁面]

點擊看大圖

如果您對該產品感興趣的話,可以

產品名稱: 日本YAMATO等離子清洗機

產品型號: PDC200/210/510

產品展商: 其它品牌

產品文檔: 無相關文檔

簡單介紹

日本YAMATO等離子清洗機PDC200/210/510 本產品是用等離子來進行表面處理的專業裝置。桌臺式，具有高性能，力求操作簡便，快捷，可顯示數據。廣泛應用于以電子材料為中心的各個行業中。用途:用于CSP、BGA、COB、基板的等離子處理。消除有機膜，金屬氧化膜。用于印刷電路板的干式清洗。界面活性處理。

日本YAMATO等離子清洗機 的詳細介紹

日本YAMATO等離子清洗機 PDC200/210/510

詢價或索取資料請點擊

Model
200	210	510
Plasma Mode
RIE		RIE/DP
RIE : Reactive Ion Etching DP : Direct Plasma
High-frequency Output
Max.300W	Max.500W
Oscillating Frequency
13.56 MHz
Dimension of Stage(mm)
250×170		410×170

Purpose : Removal of Organic films, Surface cleaning, Surface reforming, Surface etching etc.

Despite being desktop models, they feature high performance, are simple to use, and can obtain data easily.
They are genuine RIE systems, and can be DP systems with the use of options.

Interior

Composition figure

Specifications

Model	PDC-200/210/510
Plasma Mode	PDC-200(RIE or DP) / PDC-210(RIE and DP)
Main Unit
Aluminum chamber	Internal dimension: 400mmW×250mmD×150mmH
Electrode	Parallel flat stage plate: 230mmW×170mmD
Vacuum gauge	Capacitance manometer
Reaction gas system	Two systems(Ar,O2)
Controller	Programmable controller
Display	LCD Touch panel Display
Radio-Frequency Power Supply
Input	PDC-200: AC 100V,Single phase, 8A (50/60 Hz) / PDC-210: AC 200V,Three phase, 15A (50/60 Hz)
Radio-frequency output power	PDC-200:300W / PDC-210:500W
Reference oscillator	Quartz oscillator
Oscillating frequency	13.56 MHz
Matching adjustment	Automatic tuning
Discharge System (Vacuum Pump) only PDC-210 / PDC200 Optional
Displacement	Total 345 liters/min.
Input power supply	Three phases, AC200V, 4A, 50/60 Hz / PDC-200 Single phase ,AC100V,4A,(50/60Hz)
Inlet configuration	NW25
Outlet configuration	NW25
Gas Systems
Purge gas	Nitrogen (N2) and a regulator (3 kgf/cm2) with a manometer
Reaction gas G1	Oxygen (O2) and a mass flow controller (500 secm) / PDC-200:(200 secm)
Reaction gas G2	Argon (Ar) and a mass flow controller (100 secm)
Safety Mechanisms
System Protections	(1) Watching Vacuum Pump and RF generater Watching over current by Thermal Protector Magnetic relay. (2) Product Quartz oscillator When Matching unit have miss matching,protect quartz oscillator. (3) Door Panel Inter lock Build Inter lock switch.
Actions against a trouble of the vacuum pump	The plasma scrubber takes the counteractions listed below and show an Alarm message on its display when something wrong happens on the vacuum pump. The main valve closes The gas feed valve closes The isolation valve closes The oscillator stops outputting Treatment process is suspended The Alarm buzzer starts sounding *The treatment process timer stops.
REQUIRED UTILITIES
Power Supply
Main unit with vacuum pump	PDC-200: Single phases, AC100V, 15 A, 50/60Hz PDC-210: Three phases, AC200V, 15 A, 50/60Hz (with an accessory power cable of 3 meters long, and exposed crimp-style terminals of 8 millimeters long)
Gases
Purge gas	Nitrogen (N2) (Feed pressure: 2～7 kgf/cm2)
Reaction gas G1	Oxygen (O2) (Feed pressure: 1.5 kgf/cm2)
Reaction gas G2	Argon (Ar) (Feed pressure: 1.5 kgf/cm2)
Connection port	1/4" swagelok joint bulkhead union (SS-400-61)
	Note: Pressure regulators, filters and other protective devices shall be prepared by others.
Connection Diameter of the Discharge Duct (and inlet Port)
Vacuum pump's inlet port	NW25 (with a flexible stainless steel hose of 1 meter long)
Vacuum pump's outlet port	NW25
	Note: Every port has a connector designed for a flexible hose.